Directed Electronics Remote Car Starter Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Directed Electronics Remote Car Starter. Directed Electronics Remote Car Starter 16 pages. One-way fm automatic/manual transmission remote starter

Imprimer la page
AUX 1 can be programmed to trigger the horn every time the
the
button is pressed twice within 3 seconds. When horn confirmation is activated, panic
mode is enabled. If horn confirmation is disabled, panic mode will not be available.

Horn Chirp Timing

The pulse duration can be configured by your installer (from 5 ms to 200 ms).
Multi car Operation
This option allows the owner of two vehicles, both equipped with the same remote starter model, to
control both systems with a single remote control. To control the second vehicle:
Press
+
buttons simultaneously: .........................
TRUNK
LOCK
Press
+
simultaneously: ..................................
TRUNK
UNLOCK
Press
+
simultaneously
TRUNK
START/STOP
Press
+
simultaneously
TRUNK
START/STOP
Or
¾
Press
2X QUICK
¾
Press
2X QUICK
¾
Press
2X QUICK
¾
Press
2X QUICK
¾
Press
2X QUICK
Note: If the multi-level features have been modified from their default state by your installer,
the
button may have to be pressed twice, three or four times, according to the option
you chose.
OEM Style Alarm
The OEM-style alarm (if configured by your installer) monitors the doors, hood and ignition switch
of your vehicle. It will sound the horn if a door or the hood is opened, or if the key is turned in the
ignition.
x
To arm the OEM-style alarm, press the
- The OEM-style alarm will ONLY arm if the
- The LED on the antenna will flash slowly to indicate that the OEM-style alarm is now
armed.
x
To disarm the OEM-style alarm, press the
- To stop the horn from sounding if the OEM-style alarm is triggered, press the
button, or put the system in and out of Valet Mode (page-7)

Intrusion Codes via horn

The system monitors the following:
x
Doors
x
Hood
x
Ignition
Note: If an intrusion has occurred the HORN will sound for a maximum of 1 minute.
If an intrusion has occurred and
pressed, the horn provides an intrusion code corresponding to
the type of intrusion that occurred.
P.12
button is pressed, or when
LOCK
UNLOCK
: .................................... START
............................
:
STOP
¾
: ................................
LOCK
LOCK
¾
: ............................
UNLOCK
UNLOCK
¾
START/STOP: ............................ START
¾
......................
START/STOP:
STOP
¾
..............................
TRUNK:
TRUNK
button on the transmitter.
button on the transmitter is pressed.
button on the transmitter.
User Guide
or