Alemite 7836-A Manuel d'entretien

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Alemite 7836-A. Alemite 7836-A 8 pages.

Imprimer la page
Description
Model 7836-A and 7836-C1
Model 7836-A is designed with a metal-to-metal
valve (see Figure 2 for details) to dispense a variety
of non-abrasive materials.
Control valve model 7836-C1 contains a Buna-N
valve seal at the nozzle. This model is recommended
for light fluids and abrasive materials.
Swivel
The valve is equipped with an inlet swivel
assembly.
Operation
Squeeze the handle either partially or fully to
open the valve.
To latch the valve in the full open position, place
the clip over the valve's handle. See Figure 1.
Specifications
Nozzle
Valve Model
Seal Type
7836-A
Metal-to-Metal
7836-C1
Buna-N
Table 1 Control Valve Model 7836 Series
Specifications
This document contains confidential information that is the property of Alemite LLC
397566
and is not to be copied, used, or disclosed to others without express written permission.
1-800-548-1191 - http://www.partdeal.com - [email protected]
Service Guide
Control Valve
Max. Operating
Pressure
psi
Bars
3000
207
2000
138
Alemite LLC
167 Roweland Drive, Johnson City, Tennessee 37601
www.alemite.com
©
Copyright
2010 by Alemite LLC
* Early models are 1/2" NPTF(m)
Valve Model
Material Inlet
7836-A
1/2 " NPTF (f)*
7836-C1
Figure 1 Control Valve Model 7836 Series
Model 7836-C1 Shown
7836-A
7836-C1
Weight
Material Outlet
lbs
kg
3/8 " NPTF (f)
2-1/4
1
1/2 " NPTF (f)
SER 7836-A
Revision 1-13