Alemite 8586 Manuel d'entretien

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Alemite 8586. Alemite 8586 4 pages.

Imprimer la page

Description

Portable drain models 8586 and 8586-A are designed to

safely capture the oil from engine crankcases, transmissions,

and differentials.

Each drain system consists of a:

• drain bowl and drum cover assembly

• dolly assembly

• 16-gallon drum (model 8586-A only)

Drain Bowl and Drum Cover

The drain bowl assembly includes a strainer that guards

against loose items entering the drum. The strainer's center post

can be used to hold inverted filters and allow them to drain.

The drain bowl assembly mounts on a tube that can extend

up to 26 " (66 cm) from its fully seated position. See Figure 1.

The tube is held by an automatic latching mechanism. This

mechanism retains the drain bowl tube at the required height.

The cover for the drum contains a built-in float gauge that

indicates when the drum is full.

Dolly

The drum is secured to the dolly with three thumb screw

clamps. The dolly's four-wheel design allows stable mobility.

Operation and Adjustment

Lift the tube or the bowl upward and release. The latching

mechanism automatically grips the tube and retains the position

of the assembly. Lift the latch upward slightly to allow the bowl

to descend to the required height. Once reached, release the

latch.

Adjustment

Loosen the wing nut on the latching mechanism to lessen the

friction on the tube. Tightening the wing nut causes the tube

assembly to descend at a slower rate.

Evacuation

The use of an evacuation system allows the drum to be

emptied without tipping. See Figure 3.

This document contains confidential information that is the property of Alemite Corporation

670853

and is not to be copied, used, or disclosed to others without express written permission.

Service Guide

Portable Evacuation Oil Drain

Alemite Corporation

167 Roweland Drive, Johnson City, Tennessee 37601

www.alemite.com

2004 by Alemite Corporation

Figure 1 Portable Evacuation Oil Drain

Model 8586-A Shown

8586

8586-A

SER 8586

Revision (3-04)