Clarke Focus S28 Manuel de l'opérateur - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} Clarke Focus S28. Clarke Focus S28 20 pages.

Imprimer la page

ENGLISH

HOW TO PREPARE THE MACHINE

FOR OPERATION

How To Install The Batteries

The 28, 33 and 38 Focus machines use six 6-volt

batteries. The batteries are located in the battery

compartment under the recovery tank.

To Install the batteries, follow this procedure:

1. Turn key switch off.

2. Make sure both tanks are empty.

3. Disconnect the hoses from the recovery tank

(upper tank) & unplug the vac motor and

float

switch.

4. Remove the tank support bracket.

5. Remove the recovery tank.

6. Place the batteries in the solution tank as

shown in figures 6a and 6b.

WARNING:

Lifting batteries without

help could result in an

injury. Get help to lift the

batteries. The batteries are

heavy.

WARNING:

Working with batteries can

be dangerous. Always

wear eye protection and

protective clothing when

working near batteries.

NO SMOKING!

7. Connect the battery cables between

batteries and install long battery cable

assembly as indicated. See figure 6a and

6b.

8. Install the tank, reconnecting hoses and

plugging in vac motor and float switch

connectors. Install tank support bracket.

NOTE: Charge the batteries before using the

machine.

Page -16-

Clarke

Operator's Manual (EN) - FOCUS S28/L28/S33/L33/S38/L38 WB

38722B

38720B

38722B

Figure #6a

38722B

Figure #6b