Directed Video MCB1000 Manuel d'installation du propriétaire - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'installation du propriétaire pour {nom_de_la_catégorie} Directed Video MCB1000. Directed Video MCB1000 16 pages. Video multi-control unit

Imprimer la page
1.
Indicator Led - Indicates power on/off
2.
Power connector:
I
RED - Accessory power. Connect to
(+) 12 volt wire that turns on/off
with the ignition.
I
YELLOW - Constant power. Connect to
(+) 12 volt wire that has constant
power.
I
BLACK - Connect to (-) chassis
ground.
3.
AV source - These are eight-pin DIN con-
nectors for three of the AV input zones.
Each connector provides input/outputs for
video, stereo audio, and Infrared remote
operation. For a guide to the capabilities
of the MCB 1000 refer to the System

AV SOURCE DIN TO RCA

© 2001 Directed Electronics, Inc.
Capabilities Diagram.
4.
TV antenna connector - This is a standard
F-type TV antenna connector. It can be
connected to with Directed Video's TVA 10
telescoping antenna for broadcast TV or a
standard cable TV connection.
5.
Audio level controls - These are
adjustable source audio input level con-
trols. When adjusting the system, all
source inputs should be matched for con-
sistent volume level when changing
sources.
IR EYE LINK
Low current only, or
else DO NOT connect
to source main power.
13