Clarke CCO14B Manuel d'utilisation et d'entretien - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke CCO14B. Clarke CCO14B 17 pages. Abrasive cut-off saw

Imprimer la page

Fit the Spark Deflector as shown in

fig.2, securing with the M5 hex. head

screw.

FEATURES

1. A stop is provided to restrict the

height to which the arm may be

lowered. The stop is in the form of

a bolt, arrowed in fig. 3 which

should not require adjusting.

2. The vice is provided with a quick

adjust device (shown at A, fig.4).

The block, through which the

screw passes, pivots, and may be

lifted off the screw thread. This

releases the screw, and hence

the vice jaw which may then be

quickly moved into contact with

the work. The block is then flipped

back into position and the work

clamped in the normal way by

using the handle.

3. A latch, to prevent the head from being lowered, is provided. Turn the

plastic handle at the rear of the unit, indicated in fig 3, to engage the

latch.

Before carrying out any adjustments or maintenance, ensure the saw is

disconnected from the power supply.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]