Clarke CPS85 Manuel d'utilisation et d'entretien - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke CPS85. Clarke CPS85 17 pages. 85 mm plunge saw
Imprimer la page
CHANGING THE SAW BLADE
WARNING: ALWAYS DISCONNECT THE SAW FROM THE POWER SUPPLY
BEFORE MAKING ADJUSTMENTS.
1. Press and hold the spindle lock
button.
2. Loosen the clamping screw using
a hex key.
3. Remove the clamping screw,
washer and flange.
4. Set the cutting depth to
maximum.
5. Press the plunge release button
and lift up the base plate.
6. Lift the blade up off the spindle
and pull it from the saw.
7. Install the new saw blade in
reverse order.
• The arrow on the saw blade
must match the arrow showing
the direction of rotation on the
guard.
8. Press the spindle lock button and
tighten the clamping screw firmly.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
11