Clarke 6925601 Manuel d'utilisation et d'entretien - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke 6925601. Clarke 6925601 13 pages. 2.8kw 230v ptc electric fan heater

Imprimer la page

6. For fan only operation, turn the

power switch to the fan only

setting and set the thermostat to

its minimum setting.

7. Adjust the angle by loosening

both adjusting knobs and setting

the required angle.

8. Retighten the adjusting knobs.

9. When not in use, disconnect the

heater from the mains supply.

Store it in a safe, dry, childproof

location.

MAINTENANCE

WARNING: SERVICING OR INTERNAL MAINTENANCE MUST ONLY BE

CARRIED OUT BY THE CLARKE SERVICE DEPARTMENT.

WARNING: ALWAYS DISCONNECT FROM THE POWER SUPPLY AND ALLOW

THE HEATER IT TO COOL DOWN BEFORE PERFORMING ANY

MAINTENANCE TASKS.

• Check that the heater is in good working order. Take immediate action

to repair or replace damaged parts.

• DO NOT allow the heating elements to become covered with dust

which could become a fire hazard. If used in a dusty workplace it should

be cleaned after every use with a dust extractor.

• ONLY recommended parts should be used. Unapproved parts may be

dangerous and will invalidate the warranty.

• DO NOT attempt to repair a damaged heater, contact the CLARKE

service department.

• Clean the heater with a soft damp cloth once cold. DO NOT use solvents

or abrasives

• No other maintenance is required, should you discover any problem

with the heater, return it to the CLARKE service department for repair.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]