Clarke 6926013 Instructions d'utilisation et d'entretien - Page 7
Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke 6926013. Clarke 6926013 17 pages. Quartz halogen heater
Imprimer la page
UNPACKING AND ASSEMBLY
UNPACKING
When unpacking, please check contents against the following list and advise
your dealer immediately if any parts are missing.
1 x Heater
2 x Handles
1 x Fixings pack
ASSEMBLY
1. Bolt the handles to the lower frame
using the two loose bolts &
locknuts noting the orientation of
the handles.
2. Lay the heater face down and
attach the complete frame to the
heater body using the securing
knobs and the spacers located
either side of the frame tubing.
Note the order of assembly of the
handles to each side of the heater as
shown below, with particular
reference to the position of the star
washer which must be fitted against
the body of the heater.
The star washer will enable the heater to remain tilted at your chosen angle.
3. Fit the halogen tubes as described on page 11.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
1
x Lower frame
2 x Halogen tubes
1 x Remote control unit
7