Clarke 6926018 Instructions d'utilisation et d'entretien - Page 13
Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke 6926018. Clarke 6926018 17 pages. Quartz halogen heater
Imprimer la page
FAULT FINDING
SYMPTOM
Heater does not
operate, although
plugged in and
switched on.
Heater tube is glowing
hot.
Heater does not
respond to remote
controller.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
PROBLEM
Plug is loose/bad
connection.
Fuse blown.
No power at socket
outlet.
Tilt safety switch is
disabling unit.
Input voltage incorrect. Ensure power supply
Air supply obstructed.
Batteries defective.
Controller is out of
range or not pointing
at the display panel.
13
SOLUTION
Remove the plug & check
the connection of the plug
and socket.
Replace if necessary and
investigate the cause. If
fuse blow repeatedly,
consult your Clarke dealer.
Insert plug into a suitable
socket.
Ensure unit is upright. If
switch does not re-set,
consult your Clarke dealer.
matches the rating on the
label.
Ensure the heater is kept
away from any objects or
materials which could
obstruct the flow of air.
Replace batteries.
Move closer or try different
angles of pointing the
controller at the heater.