Clarke DEVIL 371PC Instructions d'utilisation et d'entretien - Page 6
Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke DEVIL 371PC. Clarke DEVIL 371PC 17 pages. Quartz halogen heater
Imprimer la page
ELECTRICAL CONNECTIONS
DEVIL 371PC (110V) UNITS
The 110V model is fitted with a 32 amp, three pin industrial plug to EN 60309
and MUST be connected to a 110 volt, 1 phase 50 Hz supply through a suitably
fused isolator switch. On no account must a 230V, 13 amp (BS1363) plug be
used.
NOTE: If a portable 110V transformer is used, make sure it has a rated
capacity sufficient to take the load of the heater.
If the heater is hard wired into the electrical system, all work must be carried
out in accordance with IEE regulations.
If in any doubt, consult a qualified electrician. DO NOT attempt any electrical
repairs yourself.
6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]