Clarke XR160 Manuel d'utilisation et d'entretien - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke XR160. Clarke XR160 17 pages. Diesel/paraffin heaters
Également pour Clarke XR160 : Manuel d'utilisation et d'entretien (17 pages)
Imprimer la page
FILTERS
Dirty air filters will cause an imbalance in the air-fuel mixture. The best
indication that this condition exists is an increase in odour or difficulty getting
your heater to ignite. This heater should never be operated without the filters in
place. If required, clean the filters as follows.
ACCESSING THE FILTERS
1. Make sure that the plug is
removed from the power supply
before carrying out any
maintenance.
2. Remove the six screws shown and
remove the top cover of the
heater.
NOTE: There may be eight screws on
the larger models.
3. Lift out the rear guard.
4. Remove the 3 screws securing the
filter cover.
5. Pull the filter cover away from the
motor.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
11