Clarke CFC100 Instructions d'utilisation et d'entretien - Page 9
Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke CFC100. Clarke CFC100 13 pages. Folding crane
Également pour Clarke CFC100 : Instructions d'utilisation et d'entretien (6 pages)
Imprimer la page
STORAGE
ALWAYS get assistance when folding the crane into its storage configuration.
1. When storing, the stabiliser must be locked in the down position. You may
need to tilt the crane back slightly to position the stabiliser correctly
During use
The stabiliser should be placed in the
up position and locked in place
using the heavy duty R Clip (30)
2. With an assistant supporting the crane, pull out the 'R' clip (27), which
secures the front leg lock pin, then pull out the lock pin.
3. Raise the leg up to the storage position.
4. Replace the leg lock pin (26), through the hole
provided in the frame so that the leg is locked in
the up position,
5. Replace the 'R' clip to secure the locking pin.
6. The pump handle (19) is housed in a bracket on
the side of the main support post (20).
7. Once the crane is folded use extreme care when
moving it to the storage location.
STORAGE WARNINGS
1. The crane MUST be firmly secured to a wall or
fixed location when not in use.
2. Use a strong strap or chain or suitable restraint to
prevent any accidental movement.
3. Test that the crane is firmly secured before leaving it in its storage location.
Alternatively you can lay the crane down and store it flat.
Always secure the jib in its lowest position.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
During storage
The stabiliser should be placed in the
down position and locked in place
using the heavy duty R Clip (30)
9
.