3Com 3CRWX5850GS - AirProtect Sentry 5850 Wireless Intrusion Prevention Sys Manuel de démarrage rapide - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} 3Com 3CRWX5850GS - AirProtect Sentry 5850 Wireless Intrusion Prevention Sys. 3Com 3CRWX5850GS - AirProtect Sentry 5850 Wireless Intrusion Prevention Sys 15 pages. Wireless intrusion prevention system
Également pour 3Com 3CRWX5850GS - AirProtect Sentry 5850 Wireless Intrusion Prevention Sys : Fiche technique (4 pages)

Imprimer la page

7. Connecting to the Sentry

You can connect to the Sentry on networks that have a DHCP server, and on networks that do not

have a DHCP server. To connect you must find the Sentry's IP address.

Finding the IP Address on Networks with a DHCP Server

If your network has a DHCP server, an IP address is automatically assigned to the Sentry. The

Sentry takes between one and two minutes to detect a DHCP server on the network. Find the

assigned IP address using the viewip command in the CLI or from the DHCP server logs. Next

enter the assigned IP address into a web browser on a computer on the same subnet to view the

Sentry's system status or change its configuration.

Finding the IP Address on Networks without a DHCP Server

If your network does not have a DHCP server, the Sentry uses a default factory-assigned IP address

(192.168.1.245).

8. Initial Login and Region Selection

When you log in to the Sentry for the first time you must select the region in which the unit will be

used. To log in to the Sentry fofollows these steps:

Connect to the Sentry and find its IP Address as described in "Connecting to the Sentry".

Launch your computer's web browser. In the address bar, enter your Sentry's IP Address and

press Enter.

At the Sentry Login Screen, type the user name and password and click Log On.

The default username and password are case-sensitive:

•

Username: admin

•

Password: password

At the Select Region screen, select the country in which your Sentry will be used.

•

If you select US (United States) simply click Apply and you will be logged into the Sentry.

•

If you select a different region, you will be prompted to enter the Worldwide License Key.

Enter the following key into the field:

7f9cd1927c4f6dd69c1876754849b9fd1999999

For complete details on configuring your Sentry, refer to the 3Com AirProtect Sentry User Guide

included on the product CD. Updates to the user manual may be found on our website:

www.3Com.com.

NOTE: The AirProtect Sentry 5850 radios are turned off until you select a region.

9. Troubleshooting

For troubleshooting information please refer to your User's Guide or visit 3Com's World Wide

Web site: http://www.3Com.com.