clarsen H133 Mode d'emploi - Page 2

Parcourez en ligne ou téléchargez le pdf Mode d'emploi pour {nom_de_la_catégorie} clarsen H133. clarsen H133 3 pages. Touch free soap dispenser

Touch Free Soap Dispenser

Please read and retain these instructions for future reference

Assembly instructions

Operation



Place batteries in the battery compartment as shown in diagram above. Please refer to Batteries section

for instructions



Unlock the top cover by turning it anti-clockwise. Gently pull cover to remove. Fill the compartment with

soap. Please make sure that the soap does not contain solid particles in order to avoid clogging.



To switch on, press the (+) button on the top for 3 seconds. If you wish to turn it off, press the (-) button

for a further 3 seconds.



To adjust volume of soap dispensed, press +/- button until the desired volume. There are 4 adjustable

levels.



Place your hand under the sensor (light indicator) to dispense soap.

Battery Removal and Installation Instructions

Unscrew the cover at the bottom of the unit and then remove the cap.

2. Insert 4 x AAA batteries into the compartment and make sure the polarity is correct. DO NOT MIX OLD

BATTERIES WITH NEW BATTERIES.

3. Put the cover back into position and screw it back into place.

4. Please remove batteries if unit is not in use to avoid damage.

Instructions for Use

H133

v001: 04/09/20