DirekTronik M5-2000 Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DirekTronik M5-2000. DirekTronik M5-2000 6 pages. Optical dvi daisy-chain extender

Imprimer la page
Troubleshooting
The display displays only black screen.
Check that all AC and DC plugs and jacks used by external power
•
supplies (both Opticis and others) are firmly connected.
Ensure that power bars are live.
•
Ensure that the converter and repeater boxes plug correctly to the
•
computer and display, respectively.
Check if the computer and display are powered on and properly
•
booted.
Ensure your graphic card is set at not higher than SXGA
•
(1,248x1,024) at 60Hz refresh ratio.
Ensure the programmed EDID be compatible with that of the
•
connected monitors.
Reset the converter and each of repeaters by de-plugging and re-
•
plugging the power adaptors.
Re-boot up the system after reconnecting the optical system cable.
•
Screen is distorted or displays noises.
Check if the graphic resolution is properly set. Go to the display
•
properties and tap the settings. Ensure that the resolution sets less
than SXGA (1,248x1,024) at 60Hz refresh ratio.
Reset the converter and each of repeaters or the system.
•
Power down, disconnect and reconnect the optical system cable or
•
DC power adaptors, and power up.
Maintenance
No special maintenance is required for the optical system cables and power
supplies. Ensure that the cables and power modules are stored or used in a
benign environment free from liquid or dirt contamination.
There are no user serviceable parts. Refer all service and repair issues to
Opticis or its authorized distributor.
Technical Support and Service
For commercial or general product support, contact your reseller. For
technical service, contact Opticis by email
website at www.opticis.com.

1-5 Troubleshooting, Maintenance, Technical Support

or visit its

Product Specifications

M5-2000 and 2001 Optical DVI daisy chain Extender
Compliance with DVI standard: supports DVI 1.0 of DDWG, using
fiber-optic communication links.
Extension limit: 500 m (1,670 feet) for SXGA (1,248x1,024) 24bit
color at 60Hz refresh rate in ultimate operation.
Fiber-optic Connection: The converter, M5-2000 and repeater
boxes, M5-2001 have duplex LC receptacles connected to two 50 or
62.5/125µm or Multi Mode glass fibers cables.
Virtual DDC: Offers the factory programming of EDID of user's
monitors, considering all monitors to be connected be compatible
with the programmed data.
Mechanical specifications of Uplink and Downlink boxes
Dimensions: 180mm / 125mm / 30mm (W/H/D)
Weight: 800.0 ± 3.0 gram for M5-2000 and M52001.
Environmental Specifications
Operating temperature: 0°C to 50°C
Storage temperature: - 20°C to 70°C
AC/DC Power Adapter
Power Input: Universal AC 85-264V, 50/60Hz, AC power cord with
power jack.
Power Output: +12 V, 3.0 A SMPS DC-power Adapter
Cord DC Jack & length: Core is 12 V and outer cylinder is GND.
Length is 18.5 cm
AC Cord length: 1.8m
:
Certification
PSE, UL, cUL, FCC, CE, TUV-GS
1-6 Product Specifications