DirekTronik SX-SWE01B Manuel d'utilisation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} DirekTronik SX-SWE01B. DirekTronik SX-SWE01B 20 pages. Mixed input type-c vga hdmi, hdmi 2.0 hdbaset switch, support 4k@60hz yuv4:4:4, 18gbps, hdr

Imprimer la page

Operating Instruction

7. IR system

The HDBaseT switch can pass the IR signal through the IR system to the HDMI source or pass the IR signal

from the HDMI source to the HDMI sink.

Dual way IR using:

Step1: "IR IN" is for HDBT output, "IR OUT" is for input channel.

Step2: HDBaseT receiver support connect with IR-RX cable to control the HDBaseT switch/DVD by remote.

Step3:HDBaseT switch support connect with IR-RX cable(IR in) to control TV by remote.

Step4: HDBaseT switch "IR Ext" support connect with IR-RX cable to control the HDBaseT switch by remote.

8. PC Tool Control

1).Download the "swe01b_4-Input HDMI Switcher.exe"software to your computer, then open it.

2).Using USB to RS232 cable connect to the RS232 port of HDBaseT switch.

3).Press "Search" button to find out the right port then click "Open Port".

8.1 Port setup

1). Communication port setting: in PC windows system run the "swe01b_4-Input HDMI

Switcher.exe"software,in RS232 INFO. ,select correct port (communication port) and baud (should be same to

baudrate in UART QUERY for connection)

2). Click "Search"refresh communication port

3). "Open Port": in disconnect status,"Close Port": connected to device.