Aftershokz OPENCOMM Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Aftershokz OPENCOMM. Aftershokz OPENCOMM 9 pages.

How do I turn on or turn off the Multipoint Pairing function?

1. Start with your headset powered off.

2. Press and hold the volume+ button until the LED indicator flashes red and blue.

3. Press and hold the Multifunction Button and volume+ button for 3 seconds until you hear "multipoint enabled."

4. Turn on the Bluetooth® function of the first device and select "OpenComm by AfterShokz" . You'll hear "connected."

5. Turn your headset off.

6. Repeat Step 2.

7. Turn on the Bluetooth® function of your second device and select "OpenComm by AfterShokz" . You'll hear "connected."

8. Turn your headset off.

9. Turn your headset on. Now your headset is paired to both devices.

10.To turn off the Multipoint Pairing function: Repeat Step 1 and 2. Then press and hold the Multifunction Button and

volume- button for 3 seconds until you hear "multipoint disabled."

Moisture Detection Alarm

Headset has a moisture detecting function. If moisture is present on the charging port while being charged, the headset will vibrate

with an audible "beep" warning. If this happens, remove the charging cable from the headphones, dry them completely and then

proceed with charging.

Restore Factory Settings

Start with the headset powered off. Set the headset to pairing mode. To do this, press and hold the Multifunction Button,

Power/Volume+ Button, and Volume- Button at the same time for 3 seconds until you hear the notification and/or feel the vibration.

Turn off the headset.

1. Headset should be kept in cool and dry place, with a temperature from 0°C to 45°C. Working in an extremely cold, extremely hot,

or high humidity environment may limit the working time and shorten the battery life of the headset.

2. Please charge the headset when it has not been in use for an extended period of time.

3. Listening at a high volume may damage your hearing and distort the audio quality.

4. Please only clean headset with a soft dry cloth.

5. Please do not charge headset immediately after exercising in order to prevent damage to the headset circuitry that can be caused by

liquid residue exposure.

6. Keeping the charging port dry will reduce the possibility of damaging the headset.