Lenovo ThinkCentre M90p Manuel de configuration - Page 32

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Lenovo ThinkCentre M90p. Lenovo ThinkCentre M90p 40 pages. (simplified chinese) power manager deployment guide
Également pour Lenovo ThinkCentre M90p : Spécifications (4 pages), Manuel de déploiement (44 pages), Manuel de déploiement (44 pages), Manuel de déploiement (32 pages), (French) Guide De Déploiement (46 pages), Manuel de déploiement (italien) (44 pages), (French) Guide de mise en œuvre (46 pages), Manuel de déploiement (japonais) (44 pages), Manuel de déploiement (42 pages)

Note: You can refer to detailed configuration examples for both manual setup and

Logging on to the client

The client can be accessed from a management console on the network that has a

supported Web browser.

1. Open a Web browser on the management console and type one of the following

2. Click Log On in the Intel Active Management Technology window.

3. In the Enter Network Password window, enter your username and password

The Web user interface enables you to perform the following tasks:

v View the system status

v View the hardware information of your AMT computer, including system,

v View, start, stop, and clear event logs

v Remote power control, including: turn the computer off, cycle power off and on,

v View and manage the Intel AMT power policies

v View and manage the Intel AMT network settings

v View and manage the Intel AMT IPv6 network settings

v View and manage the Intel AMT system name settings

v View and manage the Intel AMT user accounts

ThinkCentre M90p with Intel AMT Configuration Guide

configuration mode and automatic setup and configuration mode in

Appendix A, "Examples of configuring Intel AMT in manual and automatic

setup and configuration modes," on page 25.

in the address box:

v For manual setup and configuration mode:

http://IP_Address:16992 (for example, http://192.168.1.13:16992)

v For automatic setup and configuration mode (for TLS):

https://IP_Address:16993 (for example, https://192.168.1.13:16993)

and then click OK. You will go to the client Web user interface.

processor, memory, and hard disk drive

reset, normal startup, start the computer from a local optical drive, and start the

computer from a local hard disk drive