CTS CVT-3012SFP Manuel de l'utilisateur - Page 18
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} CTS CVT-3012SFP. CTS CVT-3012SFP 19 pages. 10/100/1000base-t to 1000base-x (sfp slot)
standalone media converter
Également pour CTS CVT-3012SFP : Manuel de l'utilisateur (2 pages)
Imprimer la page
0: Specify 0 to send a copy of ingress packets from FX port to Target TP port; however,
packets from Target port will not be forwarded to Source Port.
1: Specify 1 to send a copy of ingress packets from FX port to Target TP port. Packets from
Target port will also be forwarded to Source Port.
2: Specify 2 to send a copy of ingress and egress packets from FX port to Target TP port.
Packets from Target port will also be forwarded to Source Port.
2.12.2 Source TP, Target FX
Select "2" to enter Source TP Target FX mode from the Port Mirror Configuration menu.
0: Specify 0 to send a copy of ingress packets from TP port to Target FX port; however,
packets from Target port will not be forwarded to Source Port.
1: Specify 1 to send a copy of ingress packets from TP port to Target FX port. Packets from
Target port will also be forwarded to Source Port.
2: Specify 2 to send a copy of both ingress and egress packets from TP port to Target FX
port. Packets from Target port will also be forwarded to Source Port. Please note that when
you select this option (bi-directional traffic flow), your device will cause a loop because of
known unicast traffic. This situation will make your device fail to operate normally.
18