CTS CVT-3012SFP Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} CTS CVT-3012SFP. CTS CVT-3012SFP 19 pages. 10/100/1000base-t to 1000base-x (sfp slot) standalone media converter
Également pour CTS CVT-3012SFP : Manuel de l'utilisateur (2 pages)

Imprimer la page

1. Front Panel & Real Panel

2. CONSOLE PROGRAM

This chapter describes how to access to the Managed Converter and use its local Console

program (out-of-band). The interface and options of the Console program are same as

Telnet Management. The difference is the type of connection and the port that is used to

manage the converter.

2.1 Local Console Management

Local Console Management can be accessed using the RJ-45 DB-9 port and requires a

direct connection between the converter and a PC. This type of management is very useful

especially when the network is down and the Managed Converter cannot be reached by

other means.

Follow the steps below to begin a management session using Local Console Management:

1. Attach RJ-45 end of the serial cable to the RJ-45 DB-9 port located on the front panel

of the Managed Converter.

2. Attach the RS-232 end to the serial port of a PC or workstation.

3. Run a terminal emulation program using the following settings:

 Emulation

 BPS

 Data bits

 Parity

 Stop bits

 Flow Control

 Enable

4. Press Enter to reach the Main menu.

VT-100/ANSI compatible

9600

None

Terminal keys