Lenovo THINKSTATION D10 Manuel de l'utilisateur - Page 3

Note: If the Setup Utility program does not open, shut down the computer, wait

approximately 5 seconds, turn on the computer, then immediately press and release

the F1 key repeatedly until the Setup Utility program opens.

d. Depending on your model, do one of the following:

v Use the arrow keys to select Startup from the main menu. From the Startup menu, select

Startup Sequence and then press Enter.

v Use the arrow keys to select Advanced BIOS Features and then press Enter.

v Use the arrow keys to select Boot from the main menu. From the Boot menu, select Boot

Device Priority and then press Enter.

e. Depending on your model, do one of the following:

v Press F7 to restore the startup sequence to the default values. When prompted to load the

default setting, press Y and then press Enter.

v Press F9 to restore the setup default values. When prompted to load the default settings,

select Yes and then press Enter.

f. Press F10 to save and exit the Setup Utility.

g. When prompted, select Yes or press Y in the Setup Confirmation window and then press

Enter.

Note: After restoring a hard disk to the original factory contents, you might have to reinstall device

drivers for some devices. Refer to the Lenovo Care program or the ThinkVantage

Center for details.

Lenovo and ThinkVantage are trademarks of Lenovo in the United States, other countries, or both.

Microsoft, Windows, and Windows Vista are trademarks of Microsoft in the United States, other

countries, or both. Other company, product, or service names may be trademarks or service marks of

others.

End User may not loan, rent, lease, lend, or otherwise transfer the media provided for recovery purposes

to another user, except as permitted in the License Terms for such Product.

Productivity