Lenovo ThinkStation P510 Manuel de configuration - Page 36
Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Lenovo ThinkStation P510. Lenovo ThinkStation P510 49 pages. How to create and
configure raid arrays
Également pour Lenovo ThinkStation P510 : Configuration du matériel (35 pages)
Imprimer la page
UEFI BIOS Method (HII Interface) – Setting up single drives in JBOD mode
Use this method to create a basic single drive using the Avago MegaRAID SAS/SATA FLEX RAID Adapter
or Avago 9364-8i adapter with the system BIOS set to UEFI mode.
***Note: in order for the OS to recognize drive(s) attached to the Avago controller, the drive(s) must be
configured as a RAID array or JBOD mode. Single drive RAID 0 arrays are acceptable.
1. Install the desired drives and Avago controller into the system (see "P500/P510-P700/P710-
P900/P910 RAID Hardware Configuration" document for installation instructions).
2. After ensuring system BIOS is in UEFI mode, boot the system and enter the BIOS setup menu by
pressing the F1 key during system boot.
3. Using the arrow keys, select the "Advanced" tab
4. Using the arrow keys, highlight the selection for "Avago MegaRAID Configuration Utility", and
press Enter.