Lenovo BladeCenter H Manuel du produit - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel du produit pour {nom_de_la_catégorie} Lenovo BladeCenter H. Lenovo BladeCenter H 28 pages.

Imprimer la page

Power modules

The BladeCenter H supports up to four hot-swap redundant 2980 W AC power modules. Power module

redundancy is provided within a pair (power modules 1 and 2; power modules 3 and 4). Older models might

contain 2900 W power modules. To determine whether you need 2980 W power supplies, consult the

"Supported servers" section.

The power modules in bays 1 and 2 are used to power blade servers in blade bays 1 - 7 and I/O modules in I/O

module bays 1 - 4 and 7 - 10. The power modules are needed in power module bays 3 and 4 if you install blade

servers in blade bays 8 - 14, or if you install I/O modules in any of I/O module bays 5 - 10.

Two power modules are standard in model 5Tx, and a maximum of four power modules are supported. Models

93x, 94x, and 95x come standard with four power supplies. Table 11 shows the ordering information for power

modules (the part number contains two power modules).

Table 11. Power modules ordering part number and feature code

Part number

Feature code

68Y6601

2143

No power cables are shipped with either the BladeCenter H chassis or the power module option. Order them

separately (two power cables per one chassis). Table 12 contains the ordering information for power cables.

Table 12. Power cable ordering part numbers and feature codes

Part number

Feature code

25R5783

6270

25R5784

6271

25R5785

6226

25R5811

6273

25R5812

6272

Cooling modules

The BladeCenter H comes with two hot-swap blowers for cooling redundancy. There are two types of blower

modules that are available:

Standard blowers: Standard in model 8852-4Sx and older models.

Enhanced Cooling Module (also referred to as the enhanced blower): Standard in models 5Tx, 94x, 95x,

96x, and some older models (4Tx, 91x, 92x, 93x). Optional in other older BladeCenter H models.

To determine whether you need Enhanced Cooling modules, consult the "Supported servers" section.

Table 13 lists the optional enhanced blowers that can be ordered for the BladeCenter H chassis (the part

number contains two blowers).

Table 13. Enhanced cooling modules ordering part number and feature code

Part number

Feature code

68Y6650

0724

Physical and electrical specifications

BladeCenter H

Description

BladeCenter H 2980 W AC Power Modules (2) with Fan Packs

Description

4.3 m 208 V Double 30A NEMA L6-30P

4.3 m 230 V Dual 32A IEC 309 P+N+G/16A IEC 320-C20

2.8 m 200-240 V Triple 16A IEC 320-C20

4.3 m 220 V Double 30A KSC 8305 (for South Korea)

4.3 m 230 V Dual 32A AS/NZS 3112/16A IEC 320-C20 (for Australia/NZ)

Description

BladeCenter H Enhanced Cooling Modules (two blowers)