Lenovo 12NA-GAR1-WW Manuel de l'utilisateur - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Lenovo 12NA-GAR1-WW. Lenovo 12NA-GAR1-WW 50 pages.

Turning on your monitor and computer

To turn on your monitor and computer, do one of the following:

• If you only have the Tiny installed in the monitor, press the power button on the monitor

to turn on your monitor and computer. To locate the power button, see"*ThinkCentre

M90n-1 supported MTs list:"on page 1-3.

• If you only have the external desktop/laptop computer connected to the monitor, press

the power button on the monitor to turn on your monitor. Then, press the power button on

the computer to turn on your computer. To locate the power button, see "*ThinkCentre

M90n-1 supported MTs list:"on page 1-3.

• If you have both the Tiny installed in the monitor and the external desktop/laptop

computer connected to the monitor, do one of the following:

• If you use the Tiny, press the power button on the monitor to turn on your monitor

• If you use the external desktop/laptop computer, press the mode-switching button

Note: When both the Tiny and the external desktop/laptop computer are working, you can

press the mode-switching button to switch between the two computers. When you select the

AIO mode, you will use the Tiny. When you select the DP/HDMI mode, you will use the

external desktop/laptop computer.

When you switch between the AIO mode and the DP/HDMI mode, ensure that no data is

being transmitted between your computer and any USB device that is connected to your

monitor. If you switch between the two modes while the USB data is being transmitted, the

transmission will be interrupted and loss of data may result.

When you switch between the AIO mode and the DP/HDMI mode the following is required

to wake your computer from sleep or hibernation:

• DP/HDMI mode to AIO mode. If the Tiny installed in your monitor is in sleep or

hibernation mode, press the power button of the monitor to wake up the Tiny.

• AIO mode to the DP/HDMI mode. If the external desktop/laptop computer is in sleep

or hibernation mode, press the power button of the external desktop/laptop computer to

wake up it.

Note: When you switch between AIO mode and DP/HDMI mode, the keyboard and mouse

that are connected to your monitor are also switched.

and computer. To locate the power button, see "*ThinkCentre M90n-1 supported MTs

list:"on page 1-3.

on the monitor to select the DP/HDMI mode so that the monitor is turned on. Then,

press the power button on the computer to turn on your computer. To locate the mode-

switching button, see "*ThinkCentre M90n-1 supported MTs list:"on page 1-3.

Chapter 1.Getting started 1-14