Lenovo 4434-HB6 Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Lenovo 4434-HB6. Lenovo 4434-HB6 31 pages. Lenovo wide flat panel monitor user's guide
Également pour Lenovo 4434-HB6 : Manuel de l'utilisateur (31 pages)

Imprimer la page
Lenovo 4434-HB6 Manuel de l'utilisateur

Adjusting your monitor image

Using the direct access controls

Using the On-Screen Display (OSD) controls

This section describes the user control features used to adjust your monitor image.
The direct access controls can be used when the On Screen Display (OSD) is not
displayed.
Note: The direct access controls are blue.
Table 2-1. Direct access controls
Icon
Control
Input Change
Image Setup
Brightness
The settings adjustable with the user controls are viewed through the On-Screen
Display (OSD), as shown below.
To use the controls:
1. Press
to open the main OSD menu.
2. Use
or
to move among the icons. Select an icon and press
that function. If there is a sub-menu, you can move between options using
or
, then press
Press
to save.
3. Press
to move backwards through the sub-menus and exit from the OSD.
4. Press and hold
adjustments to the OSD. Press and hold
and allow adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key,Press and hold the
10 seconds to disable / enable DDC/CI function. The words " DDC/CI Disable/DDC/
CI/Enable" shows on the screen.
Description
Switches the video input source.
Activates automatic image adjustment.
Direct access to Brightness adjustment.
to select that function. Use
for 10 seconds to lock the OSD. This will prevent accidental
Chapter 2. Adjusting and using your monitor
or
to make adjustments.
for 10 seconds to unlock the OSD
to access
buttons for
2-3