Lenovo G710 Manuel de l'utilisateur - Page 27

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Lenovo G710. Lenovo G710 46 pages. Lenovo notebook

What can I do if the back-up process fails?

If you can start the backup but it fails during the back-up process, try the

following steps:

1 Close all open programs, and then restart the back-up process.

2 Check to see if the destination media is damaged. Select another path and

then try again.

When do I need to restore the system to its factory status?

Use this feature when the operating system fails to start up. If there is

critical data on the system partition, back it up before starting recovery.

BIOS setup utility



What is the BIOS setup utility?

The BIOS setup utility is a ROM-based software. It displays basic computer

information and provides options for setting boot devices, security,

hardware mode, and other preferences.

How can I start the BIOS setup utility?

To start the BIOS setup utility:

1 Shut down the computer.

2 Press the Novo button and then select BIOS Setup.

How can I change the boot mode?

There are two boot modes: UEFI and Legacy Support. To change the boot

mode, start the BIOS setup utility and set boot mode to UEFI or Legacy

support on the boot menu.

When do I need to change the boot mode?

The default boot mode for your computer is UEFI mode. If you need to

install a legacy operating system, such as Windows, Linux or Dos, etc (that

is, any operating system before Windows 8) on your computer, you must

change the boot mode to Legacy support. The legacy operating system,

such as Windows, Linux or Dos, etc cannot be installed if you don't change

the boot mode.



How can I contact the customer support center?

See "Chapter 3. Getting help and service" in the

Information Guide

Chapter 4. Troubleshooting

Lenovo Safety and General