Lenovo S930 Manuel d'entretien - Page 33

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Lenovo S930. Lenovo S930 33 pages.
Également pour Lenovo S930 : Manuel de démarrage rapide (6 pages), Informations importantes sur le produit Manuel (20 pages)

LENOVO S930 Cellphone Service Manual

assembled slant.

(2) Assemble fixture should be used to assemble TP to front housing.

(3) Before assembling motherboard to the front cover assembly, make sure that the

silicone cushion on the P-sensor sensor is fitted properly.

(4) When welding volume key FPC to motherboard, make sure that FPC is in direction

frame on motherboard and it should not to be slant.

(5) When attaching the volume key FPC to the front cover, align it with the aligning

frame. The position must be exact.

(6) Soft part of volume key should be pressed to socket in back housing(WIFI antenna

asm) and volume key position must be exact.

(7) There should be no gap between front housing and WIFI antenna asm when they are

assembled together. All snaps should work. Check snaps near headset jack and

bottom two corners.

(8) When assembling cables, make sure cables are well organized. To avoid interference

with the case, all cables must be in their exact position.

(9) When assembling the main/sub camera, connectors should be fit after camera itself,and

make sure the connectors are located correctly.

(10) When dissembling the motherboard, lift the speaker box module on the top at first to

avoid any damage on the module.

(11)Lock TF connector cover after taking off TF card. Be sure that connector cover is

in lock position when the phone is packed.

(12) Main camera conductive tape should be in exact position and not be out of

socket or on socket wall.

Page 33