Aftershokz ASC100 Series Manuel de l'utilisateur
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Aftershokz ASC100 Series. Aftershokz ASC100 Series 3 pages.
Également pour Aftershokz ASC100 Series : Manuel de l'utilisateur (9 pages)
Imprimer la page
User Guide
PTT/Multifunction
ENGLISH
While your headsets and cellphone are connected.
Function
How to Set Up ASC100 Series
Play/Pause
Next song
1. Charge
Charge the headsets with the included magnetic charging cable. The LED
Previous song
indicator will turn from red to blue when charging is complete.
2. Pair
Answer call
Start with your headsets off. Enter pairing mode by pressing and holding
volume+ until ASC100 series says "pairing" and the LED indicator flashes
End call
red and blue.
Answer the call waiting and
3. Connect
hand up current call
Open your device's Bluetooth
menu and select "ASC100 series by
®
AfterShokz". ASC100 series says "connected" and the LED indicator will
Reject a call
flash blue one time.
Activate voice assistant
Call back the last number
LED Indicator
PTT/Multifunction
Magnetic Charging Port
Volume + / On-off ; Volume -
Function
Action
Action
Voice Prompt
Power ON
Press and hold on-off key for 2s
Single click
One beep
Power OFF
Press and hold on-off key for 3s
Double click when
One beep
playing music
Press and hold both buttons for
Mute
2s while on a call
Triple click while
One beep
playing music
Press and hold both buttons for
Switch EQ
3s while playing music
Single click
Two beeps
Check battery
Press and hold Volume -
Status
button for 2s
Single click
One beep
Adjust volume
Press Volume + or Volume - button
Hold for 2s
One beep
Headsets Specification
Hold for 2s
One beep
Part number
Hold for 2s
No prompt
Speaker
Bone conduction speaker
Double clicks when standby
"To call the last number"
Bluetooth
Version
®
Bluetooth
Power
Volume
Microphone 2
Charge time
90 mins
Battery
Voice Prompt
Compatible profiles
A2DP, AVRCP, HSP, HFP
"Welcome to AfterShokz"
Continuous play
Up to 8 hours
Standby time
Bluetooth
working frequency range:
"Power off"
®
Warranty
2 years
Maximum RF output power
"Mute on" or "Mute off"
Charge voltage
5V±5%
Water resistance
"EQ switch"
Speaker impedance
8.5ohm±20%
Battery capacity
"Battery high/Battery medium/
Battery low or please charge"
LED Indicator
One beep
Solid red
Charging
Solid blue
Charging complete
Flashes red and blue
Pairing mode
ASC100
Frequency
20Hz~20KHz
Dual DSP
Flashes blue
Incoming call
Microphone type
noise canceling mic
Flashes red every two minutes
Low battery
Bluetooth
range
10 m
®
v5.0
®
Microphone 1
Wearing
Lithium Battery
· When headsets are paired, music and phone call will be played by headsets.
Weight
32 g
· When headsets are unpaired, music and phone call will be played by mobile
phone / mobile terminal.
Up to 10 days
NFC Function ( Near Field Communication)
2402MHz~2480MHz
Headsets support NFC pairing.
4 dBm
1. Setting headsets to ON mode or Pairing mode.
2. Putting the area of headsets with NFC sign close to NFC detection area of mobile
IP55
phone or wireless adapter.
3. Blue light will flash one time once headsets were paired successfully, with the voice
170 mAh
notifying "connected".
Charging Warning System
Headsets has liquid residue detecting function. If there is liquid residue like sweat on the
charging port when being charged, headsets will flash red-blue light, headsets core will
vibrate with "Beep---"warning. After liquid residue being removed, warning will stop,
headsets can be charged normally.
Restore Factory Setting
Enter into paring mode, press the PTT/multifunction button, volume +, and volume -
button at the same time for 3 seconds, until you hear the notification tone and feel
the vibration.
Storage and Maintenance
1. Headsets should be put in cool dry place, working in temperature from 0 to 45
degree centigrade. Working in environment supercooled, superheated or
excessive humidity may limit the working time and shorten the battery's life.
2. After being stored for a long time, please charge it before use again. Play with
excessive volume may lead distortion of sound, and even hurt your hearing.
3. Please clean headsets with soft dry cloth.
4. Please don't charge it immediately after exercising, in case the sweat residue in
the charging port damage the headsets circuit.
5. Keeping the charging port dry will reduce the possibility of damaging the headsets.
Services
Our company promises that in normal use, operation and maintenance conditions, we
will gives two years of free warranty. Please contact the local dealer for more help.
Product Scrap Treatment
Please do not discard the electronic parts together with your daily garbage. In some
countries and regions, departments have been set up to sort and collect discarded
electronic products. Please consult local authorities for more details.
Contact Us
3300 N Interstate Hwy 35, Austin, TX 78705, US
www.aftershokz-communications.com
Factory: Shenzhen Voxtech Co., Ltd.
Address: Floors 1-4, Factory Building 26, Shancheng Industrial Park, ShiyanStreet,
Ban'anDistrict, Shenzhen, Guangdong, China
Phone number: 400-6830-858