Lenovo RackSwitch G8264 Manuel du produit - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel du produit pour {nom_de_la_catégorie} Lenovo RackSwitch G8264. Lenovo RackSwitch G8264 23 pages.
Également pour Lenovo RackSwitch G8264 : Manuel du produit (26 pages)
Imprimer la pageMini-USB to RJ-45 (jack) adapter cable (0.2 m) with retention clip
DB-9 to RJ-45 (jack) adapter
The G8264 switch supports optional adjustable 19-inch, 4-post rack installation kit, part number 00D6185.
Optionally, Air Inlet Duct, part number 00D6060, can be ordered with the G8264 (rear-to-front airflow) switch for 4-
post rack installations.
The G8264 (front-to-rear airflow) switch optionally supports recessed 19-inch, 4-post rack kit (00CG089) which is
used when the switch is installed in the 1410 Intelligent Cluster Rack, 9363 Enterprise Rack, or PureFlex System
Rack with NeXtScale System. The G8264 (front-to-rear airflow) switch also supports 4-post iDataPlex rack kit
(90Y3535) which is used when the switch is installed in the iDataPlex Rack.
The G8264 switch ships standard without any AC power cables. Table 2 lists the part numbers and feature codes to
order the power cables (two power cables are required per switch).
Table 2. Power cables
Description
Rack power cables
1.5m, 10A/100-250V, C13 to IEC 320-C14 Rack Power Cable
2.8m, 10A/100-250V, C13 to IEC 320-C20 Rack Power Cable
4.3m, 10A/100-250V, C13 to IEC 320-C14 Rack Power Cable
Country-specific power cords
European 10A line C13 to CEE 7/7 (2.8M)
Denmark 10A line C13 to DK2-5A (2.8M)
Switzerland 10A line C13 to SEV 1011 (2.8M)
Israel 10A line C13 to SI 32 (2.8M)
South Africa 10A line C13 to SABS 164/1 (2.8M)
United Kingdom 10A line C13 to BS 1363 (2.8M)
Australia/NZ 10A line C13 to SAA-AS C112 (2.8M)
Korea 7A line C13 to KETI 15A/250V (2.8M)
India 6A line C13 to Fig 68 (2.8M)
China 6A line C13 to GB 2099.1 (2.8M)
Brazil 10A line C13 to NBR 6147 (2.8M)
Argentina 10A line C13 to IRAM 2063 (2.8M)
10A/250V C13 to NEMA 6-15P 2.8m power cord
Japan 10A/100V C13 to JIS C-8303 2.8m power cord
Supported cables and transceivers
With the flexibility of the G8264 switch, clients can take advantage of the technologies that they require for multiple
environments:
For 1 GbE links, clients can use RJ-45 SFP transceivers with UTP cables up to 100 m. Clients that need
longer distances can use a 1000BASE-SX transceiver, which can drive distances up to 220 meters by using
62.5 µ multi-mode fiber and up to 550 meters with 50 µ multi-mode fiber, or the 1000BASE-LX transceivers
that support distances up to 10 kilometers using single-mode fiber (1310 nm).
For 10 GbE server or upstream network connectivity, clients can use direct-attached copper (DAC) SFP+
RackSwitch G8264
Part number
Feature code for
MTM 7309-HC3 and
7309-HC4
39Y7937
6201
39Y7938
6204
39Y7932
6263
39Y7917
6212
39Y7918
6213
39Y7919
6216
39Y7920
6218
39Y7922
6214
39Y7923
6215
39Y7924
6211
39Y7925
6219
39Y7927
6269
39Y7928
6210
39Y7929
6223
39Y7930
6222
46M2592
A1RF
46M2593
A1RE
3