CTS CVT-RACK-16 Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} CTS CVT-RACK-16. CTS CVT-RACK-16 2 pages. 16-slot universal media converter chassis

Imprimer la page
CVT-RACK-16
16-Slot Universal Media
Converter Chassis
User's Guide
Version 2.0
2. Installation
(Refer to the back page)
2.1 Rack Mounting
CVT-RACK-16 can be mounted in a standard EIA 19-
inch rack. Begin by aligning the mounting brackets
along the sides of the unit with the slit over the holes.
Secure the screws tightly to fit the brackets to the
device before fixing it into the 19-inch rack. Please
ensure that the ventilation holes are not obstructed.
The step-by-step procedure is shown on the next page.
2.2 Media Converter
1. Screw the upper and lower sliders on media
converter.
2. Carefully align the slider with slide way, then
press it with firm and steady pressure.
2.3 Cabling
1. The correct cable specifications and distances will be
listed on the media converter's documentation.
2. Connect the RJ-45/fiber cable to the front of media
converter.
2.4 Powering
1. Connect the female end of the power cord to the
MCR.
2. Connect the male end of the power cord to an
external AC outlet.
3. LEDs of the power A, B on the CVT-RACK-16 will
illuminate when the installation is done correctly.
4. Similarly, the power indicator LEDs on the media
converter will illuminate when installation is
complete and correct.
Trademarks
Copyright
Connection
Technology
Contents subject to revision without prior notice. CTS
is a registered trade mark of Connection Technology
Systems Inc.
Other trademarks remain the property of their owners.
Copyright Statement
This publication may not be reproduced as a whole or
in part, in any way whatsoever unless prior consent
has been obtained from Connection Technology
Systems Inc.
FCC Warning
The CVT-RACK-16 has been tested and certified as
with in Class A digital specifications under Part 15 of
FCC Rules. These standards are designed to provide
reasonable protection from harmful interference when
these units are used in a commercial environment.
These devices can use, generate and radiate radio
frequency energy and may cause harmful interface to
radio communications unless installed in accordance
with the instructions in this User's Guide. Operation of
this device in a residential area is likely to cause
harmful interference which will make the user
responsible for the appropriate remedial action at
his/her expense.
CE Mark Warning
CVT-RACK-16 is a Class A product. In some
domestic environments, it may cause radio interface
in which case the user will need to consider adequate
preventative measures.
3. Specifications
Slot number
16 slots
LED
Power A Activity
Power B Activity
Redundancy
2 Hot-Swappable Power Modules
Power
AC Power Option (Per Power Supply Unit):
-Input: 100V ~ 240V, 3.0A, 50/60Hz
-Output: 5VDC
DC Power Option (Per Power Supply Unit):
-Input: 48VDC
-Output: 5VDC
Power Consumption: 9.5W (Empty Loading)
Typical Operation & Storage Temperature
Operation: 0 ~ 50°C
Storage Temperature: -20 ~ 60°C
Humidity: 5% ~ 90% non-condensing
Dimension and Weight
Size: 440 x 385 x 90mm (W x D x H)
Weight:
-The Chassis Only: 7.65KG
-The Chassis With 2 Power Modules: 10.4KG
Emission/Safety:
EMI: FCC Class A, CE
1. Introduction
Systems
Inc.
The CTS (Connection Technology Systems) Media
Converter Chassis, CVT-RACK-16 is designed to
accommodate sixteen separate and independent
CTS media converters within a rack-mountable rack.
CVT-RACK-16 is fitted with two hot-swappable
power supplies and three hot-swappable fans for
enhanced reliability. This means that if one power
supply fails, the other is capable of taking over
immediately. The other benefit is that if power supply
or fan fails then it can be replaced with another one
without taking back whole CVT-RACK-16.
Power status is shown on the LED display for the
user to monitor and respond as necessary. For
optimal performance, please ensure that CVT-
RACK-16 is placed in a well-ventilated position,
enabling air to circulate above and below the unit.
CVT-RACK-16 can also be installed in a standard
19-inch site rack; provision has been made for the
appropriate connecting brackets.
Note: This Chassis has been designed to house only
the proprietary range of media converters. Any other
configuration is at the user´s own risk.
Order Information
CVT-RACK-16
16-Slot Universal Media Converter Center
CVT-RACK-16-AC
Slide in AC Power Module for CVT-RACK-16
CVT-RACK-16-DC
Slide in DC Power Module for CVT-RACK-16
CVT-RACK-16 FB
Front Bracket set for CVT-RACK-16(Optional)
Strongly Recommended:
To ensure the best performance of standalone
media converters, please keep your environment
temperature under 40 degrees Celsius. Or, install
two power modules for CVT-RACK-16.
Contact Information:
Connection Technology Systems INC (CTS)
18F-6, No.79, Sec. 1, Xintai 5th Rd., Xizhi Dist.,
New Taipei City 221, TAIWAN, R.O.C.
TEL: +886 2 26989661 FAX: +886 2 26989662