Lenovo ThinkSystem SM27A17643 Manuel de l'utilisateur - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Lenovo ThinkSystem SM27A17643. Lenovo ThinkSystem SM27A17643 45 pages. Analog 1x8 kvm switch
Imprimer la page
Chapter 2: ThinkSystem Analog 1x8 KVM Switch
Step 1: Attach the Cable-Support Bar
You can install the cable-support bar onto the rackmount brackets to
bear all cables connected to the SM27A17643 switch. The proper position
to attach this bar depends on the switch's front panel position in the
rack.
If the front panel will face the front of the rack, fasten the bar to the
far from
L-shaped holes
If the front panel will face the rear of the rack, fasten the bar to the
close to
L-shaped holes
To attach the cable-support bar:
1. Insert either end of the cable-support bar into one of the L-shaped
holes on a rackmount bracket.
2. Align the bar's threaded hole with the threaded hole at the end of the
rackmount bracket. Then secure the bar with one of the included cap
screws.
3. Repeat the above steps for attaching the other bracket.
the ears of the rackmount brackets.
the ears of the rackmount brackets.
6