CTX PV511 Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} CTX PV511. CTX PV511 19 pages. Ctx pv511: user guide

Start Your Installation

Connecting the Display

To setup this display, please refer to the following figure and procedures.

1. Be sure all equipment is off.

2. Connect the VGA signal cable from display input-A or display input-B

connector to the 15-pin connector of your host computer and tighten the

screws.

3. Connect the power adapter to the power connector; plug one end of the

power cord into the power adapter, and then the other end into an electri-

cal outlet.

Power Adapter

Power Cord

Notice:

To ensure the LCD display can work well with your computer,

please configure the display mode of your graphic card to make it

less than or equal to 1024 x 768 resolution and make sure timing

of the display mode is compatible with the LCD display. We have

listed the "Compatibility Modes" of this LCD display in appendices

for your reference.

Mac Adapter *

* For Macintosh, use the Mac adapter.

English

VGA Cable