Nikon Nikkormar FT3 Manuel d'instruction - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Nikon Nikkormar FT3. Nikon Nikkormar FT3 32 pages.

LOADING THE CAMERA

Press down the camera back latch on the side of the

camera and the hinged back will spring open

Pull up

on the rewind knob and drop a film cartridge into the

film chamber with the film leader pointing towards

the take-up spool. Now, push down the rewind knob

to hold the cartridge in place and insert the end of

the film leader into anyone of the three slots in the

take-up spool. Rotate the take-up spool as shown in

the illustration so that

the.

film passes under the spool

with its emulsion side (dull side) facing out. Make sure

that the perforations along the edges of the film mesh

with the sprockets.

Close the camera by pressing on the back until it

snaps into place. Fold out the rewind crank and turn

it gently in the direction of the arrow until you can

feel a slight

tension.

This will take up any slack in the

film cartridge. Be careful not to exert too much

pres-

sure on the rewind crank.

Loading exposes the first few inches of the film. To

dispose of this exposed film, wind the film advance