Nikon TIRF Manuel d'instructions - Page 37

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Nikon TIRF. Nikon TIRF 37 pages. System for te2000

Imprimer la page
AC adapter for the
shutter control unit
Power cord of AC
adapter for the shutter
control unit
Operating conditions
Installation category
Product safety
Other
VI Performance and Specifications
Manufacturer:
PHIHONG ENTERPRISE (Taiwan)
Model:
PSA-30U-120 (N)
Rated input voltage: AC 100-240 V, 0.7 A, 50/60 Hz
Rated output voltage: DC 12 V
Rated output current: 2.5 A
Electric shock prevention class: Class I
Others:
UL-recognized product, GS-approved product，
CE-satisfied product
• Using units in areas where the supply voltage is 100 to 120 V
UL listed detachable power cord set (3 conductor grounding Type SVT,
No.18AWG, 3 m long maximum, rated at 125 V AC minimum)
• Using units in area where the supply voltage is 220 to 240 V
Approved according to EU/EN standards (3 conductor grounding Type
HO5VV-F, 3 m long maximum, rated at 250 V AC minimum)
Altitude:
2000 m max.
Temperature:
5 to 35°C
Relative humidity:
60% max. (no condensation)
Pollution degree:
Degree 2
Indoor use only
CategoryⅡ
Laser
FDA (CDRH) Class II product
EN60825-1 Class 2 product
IEC60825-1 Class 2 product
CE marking
LVD (Low Voltage Directive):
EN61010-1, EN60825-1 (1994+A2) [GS-Approved]
EMC (Electro Magnetic Compatibility):
EN61326 (EN55011 Group 1 Class B,
EN61000-4-2/4-3/4-4/4-5/4-6/4-8/4-11)
Australia EMI regulation: AS/NZS2064 Class B
FCC Part 15B Class A, Canada EMI regulation
This equipment has been tested and found to comply with the limits for a Class
A digital devices pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and if not installed
and used in accordance with this instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which the user will be
required to correct the interference at the user's own expense.
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe A respecte toutes les exigences du
Réglement sur le matériel brouilleur du Canada.
See the corresponding instruction manuals supplied with the microscope, and
laser sets for relevant performance information and specifications.
- 35 -
VI