Nikon Coolpix 5000 Mise à jour du micrologiciel - Page 2

Parcourez en ligne ou téléchargez le pdf Mise à jour du micrologiciel pour {nom_de_la_catégorie} Nikon Coolpix 5000. Nikon Coolpix 5000 5 pages. Using nikon view 4 with windows xp home edition / windows xp professional
Également pour Nikon Coolpix 5000 : Spécifications (2 pages), Addendum au manuel de l'utilisateur (2 pages), Brochure & Specs (4 pages), Manuel du logiciel (7 pages), Spécifications (3 pages), Manuel de poche (14 pages)

The principal changes to the camera firmware with the release of version 1.6

are in the form of the following improvements to product performance and

minor bug fixes (not listed):

1. The Coolpix 5000 lens will no longer get stuck when it moves forward

during the camera operation.

4.0 Restrictions on Usage

This utility will update the firmware in your COOLPIX 5000 to version 1.6. It

can only be used if the version of the firmware in your COOLPIX 5000 is

version 1.5 and is not suitable for use with any other model of Coolpix

camera. This version of the firmware can only update NTSC cameras.

5.0 Warnings

Your COOLPIX 5000 could malfunction should any of the problems listed

below occur while the firmware is being upgraded. Please exercise all

necessary caution during the upgrade. The upgrade can be performed for you

at a Nikon-authorized service center in the event that you do not have the

equipment necessary to perform the upgrade, or are otherwise unsure that

you would be able to perform the upgrade yourself. Your COOLPIX 5000

could malfunction should any of the following occur during upgrade:

1. The camera turns off during the upgrade process

2. The data cable is disconnected

3. A problem occurs with the computer

4. The upgrade is performed in a place where there is excessive electrical

noise.

The camera could also malfunction if you make a forced exit from the

uploader or another application interferes with the uploader during the

upgrade. Be sure to exit any other applications before running the uploader

software.

6.0 Confirming the current firmware version

1. Turn the camera off

2. Hold down the MENU button.

3. Turn the camera "On" while continuing to hold down the MENU button until

an image appears. The screen will display the current firmware version like:

"E5000V1.5". If it reads other than 1.5, your firmware should not be

updated.

4. Turn the select dial "Off". This completes the version confirmation

procedure.

7.0 Prepare for the Upgrade

Please make sure that you have the following items available