Nikon D200 Manuel de démarrage rapide - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Nikon D200. Nikon D200 9 pages. Exploring
Également pour Nikon D200 : Brochure & Specs (13 pages), Brochure (7 pages), Manuel de configuration (2 pages), Brochure & Specs (18 pages), Brochure (14 pages), Spécifications (2 pages), Caractéristiques et tableau comparatif (1 pages), Manuel de l'utilisateur (19 pages), Spécifications (2 pages), Manuel d'utilisation (23 pages), Manuel de démarrage rapide (2 pages), Manuel (25 pages)

Upgrading the Firmware for the D200

Copy the firmware to the memory card

The firmware can be copied to the camera memory card either by connecting the

computer directly to the camera using the USB cable, or by removing the memory card

from the camera and inserting it in a card reader.

Important

Only one of the two sets of firmware (A or B) can be updated at a time. Use separate

memory cards for each set of firmware, or update firmware A as described below, then

format the memory card and repeat the process for firmware B.

Direct USB Connection

Note: Use the EH-6 AC adapter or a fully-charged EN-EL3e rechargeable Li-ion battery.

file:///K|/d200_firmup_En/En/d200ab_win_en_ABF.html (4 of 9) [6/18/2010 4:02:15 PM]

Turn the camera off and insert a formatted memory card. For information on

formatting memory cards, see the camera Guide to

Digital Photography

Press the MENU button, select the setup

menu, and set the USB option to Mass

Storage.

Turn the camera off and connect the USB cable as shown below.

Turn the camera on.

UC-E4 USB cable