Nikon DS-5MC Manuel d'instructions - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Nikon DS-5MC. Nikon DS-5MC 49 pages. Ds camera control unit, ds camera head, ds cooled camera head
Également pour Nikon DS-5MC : Manuel d'instructions (47 pages), Référence rapide (15 pages)

Imprimer la page
Nikon DS-5MC Manuel d'instructions
(2) USB cable
A USB cable is used to connect the DS-U2 to the PC. We recommend a USB 2.0-compatible
AB-type cable.
(3) C mount lens
A C mount lens is required to photograph subjects other than photomicrographs. Any lens that
meets the following conditions may be used:
•
Protrudes no more than 10 mm from the mount surface into the camera.
Less than 5mm for DS-Ri1.
•
The image circle of the DS-2Mv, DS-2MBW, and DS-2MBWc is 1/1.8", and the image circle
of the DS-Fi1, DS-Qi1Mc, DS-5M, DS-5Mc, and DS-Ri1 is 2/3". Use a lens for 1" or 2/3".
•
When using diaphragm settings brighter than F2.8, you may observe slight light fall off
around the periphery.
(4) Nikon 80i/90i microscope
When using the Nikon 80i microscope equipped with a digital imaging head or the Nikon 90i
microscope, you can connect the DS-U2 to your microscope via the USB interface. The DS-U2
enables control of the microscope and display of microscope conditions using PC application
software. To connect the Nikon 80i/90i microscope to the DS-U2, use the USB cable provided with
the microscope.
The application software is sold separately.
*
The Nikon 80i/90i microscope can be connected directly to a PC via the USB
interface. All available microscope operations except autofocus can be controlled
from the PC, and microscope settings can be checked from the PC monitor.
Chapter 2
Peripheral Equipment
- 4 -