Nikon MD-4 Manuel d'instruction - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Nikon MD-4. Nikon MD-4 23 pages. Motor drive

BASIC OPERATION

7.Attach the motor drive to the camera body.

Make sure the S-C mode selector (15) of the

motor drive is set to L (Lock) before attaching

the camera. Otherwise the motor might start

operating. Place the camera body on top of the

motor drive so that the motor drive's mounting

screw (20) lines up with the camera's tripod

socket and the camera positioning pin (17) is

aligned with the motor drive coupling hole.

Then turn the attachment wheel (21) counter-

clockwise until the two units are screwed tightly

together.

continued

8.Load the camera with film.

Load film into the camera in the normal way.

Note: Do not detach the motor drive from the

camera while it's still loaded with film. Unless

you are in o darkroom. the film might become

exposed to liqht entering through the bottom of

the camera.

Distributed by WWW.LENSINC.NET