Nikon ECLIPSE E600 POL Manuel d'instructions - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Nikon ECLIPSE E600 POL. Nikon ECLIPSE E600 POL 48 pages. Polarizing microscope
Imprimer la page
2
2. Microscopic Procedure
I
Episcopic Illumination Microscopy
D
~
~
..
B
EJ
II
g
m
Push in the illumination
changeover lever of the Epi-
illuminator to the limit
(indication: B.F) to set the
brightfield illumination.
Turn the Epi/Dia changeover
switch on the back of the
microscope stand to the EPI
position.
Turn on the power. (Flip the
switch to the·· I" side.)
As soon as the power comes on.
the switch lights.
Set the brightness adjuster to
give the desired brightness.
Pressing the auto-photo switch
will set the voltage for the
brightness that provides the best
color reproduction.
Insert filters ND2 or 4 and
NCB 11 of the Epi-illuminator
into the optical path.
ND2 or 4 reduces glare in the
binocular eyepiece. NCB 11
improves color reproduction.
Confirm that the ND8 anti-glare
filter lever is pushed in.
Push in the analyzer slider of the
intermediate tube to remove the
analyzer from the optical path.
Put the Bertrand lens turret in the
"O''
position to remove the
Bertrand lens from the optical
path.
D
Set the brightfield illumination.
•• .\='
lij
~
f: -1
_Jj)_J
((_"°'+ii~
~:----
----~
fJ
Flip the switch
"
~oc::_l to the "EPI" side.
II
Adjust the
brightness.
0
i't
-
,
1
11
Flip the switch
to the .. I " side .
...-
'C.
I
:"'~
'~
,-61
Push in the
analyzer slider.
- Iii
Push in the
NOS
filter lever.
- l!I
Turn the turret to the "O" position.
13