Nikon Forestry Pro Manuel d'instruction - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Nikon Forestry Pro. Nikon Forestry Pro 19 pages.
Également pour Nikon Forestry Pro : Manuel de l'utilisateur (48 pages)
Imprimer la page
Operation and internal display
【8】 Three-point measurement (height between two points) mode
En
Operation/Results
Work
8
Measurement with Three-point measurement (height between two points) mode
Seeking your target
8-1
Horizontal distance (1st target)
(Align the reticle with target)
Measurement
8-2
(Laser irradiate symbol is
displayed.)
Follow by 8-1
8-3
Failure to measure
Repeat 8-1, 8-2, 8-3 until measurement is
complete.
Horizontal distance
8-4
Measurement OK
Followed by 8-5.
Aiming (2nd target)
Vertical separation
8-5
(Align the reticle with
(height from horizontal level to 2nd point).
target)
Measurement
8-6
(Laser irradiate symbol is
displayed)
Vertical separation
8-7
Measurement OK
(height from horizontal level to 2nd point).
Aiming (3rd target)
Vertical separation
8-8
(Align the reticle with
(height between 2nd target and 3rd target)
target)
Measurement
8-9
(Laser irradiate symbol is
displayed)
Vertical separation
8-10
Measurement OK
(height between 2nd target and 3rd target)
After 2 seconds, follow by 8-1
Regardless of process, after 30 seconds since
9
Power off
your last operation, power turns off.
28
Display examples
Button
Display
meter
yards
feet
Elevation (˚) Depression (˚)
blinks
POWER
blinks
24.4
26.8
80.5
24.4
26.8
80.5
blinks
POWER
3.4
3.8
11.0
3.4
3.8
11.0
blinks
POWER
19.0
30 seconds
without
operation
Others
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules and to EU EMC directive. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
The Forestry Pro is a simplified laser rangefinder. Results obtained should not be used for official records.
En
29