Nikon autofocus speedlight SB-900 Manuel - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Nikon autofocus speedlight SB-900. Nikon autofocus speedlight SB-900 8 pages. Speedlight
Également pour Nikon autofocus speedlight SB-900 : Fiche technique (2 pages)
Imprimer la page
Setting the
With the unit on, press and hold the ZOOM and the
1.
" – " together for two seconds.
Press either the ZOOM or MODE button to select wireless
2.
mode ON/OFF.
Press ON/OFF for one second. The flash will be set in
3.
the Wireless Remote mode. (Default: CH 3, Group A)
Press MODE to highlight the channel (1, 2, 3 or 4) and
4.
use "+/–" to select the same channel as the Master Flash.
Press MODE again and choose a group (A, B or C).
5.
The amount of output compensation set for that group
on the Master Flash will determine the amount of output
from the Remote Speedlight.
Be sure to choose the same channel number as set on
the Master flash unit or in the Commander mode on your camera.
To exit Wireless and return to Normal TTL operation
To reset the SB-600 unit to normal TTL operation, reverse the steps above or hold ON/OFF
and MODE button for two seconds. To exit remote operation of the SB-900 or SB-700 simply
turn the ON-OFF switch/wireless settings to the ON position.
To set the SB-R200 Remote
Speedlight to the desired
Group and Channel, simply
rotate the dial for that
function.
WHY MORE THAN ONE
SPEEDLIGHT?
For more information on setting your wireless Speedlights please see your instruction manual.
SB-600
to Wireless Remote Mode
Create dramatic
lighting with
two Speedlights
positioned
strategically
within the scene.
Speedlight
Group A
SU-800 on-camera
commandar
Speedlight
Group B