Dirt Devil CV1500 Manuel du propriétaire - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Dirt Devil CV1500. Dirt Devil CV1500 13 pages. Central vacuum systems
Également pour Dirt Devil CV1500 : Manuel d'installation rapide (2 pages)
Imprimer la page
OPERATING INSTRUCTIONS
Simply switch on the VacPan automatic dustpan by pushing the raised tab with your foot.
Switching on the VacPan activates your central vacuum. Brush dirt and debris toward
the VacPan. When cleaning is complete, switch off the VacPan and the central vacuum
system by pushing the raised tab with your foot.
INSTALLATION INSTRUCTIONS
1. VACPAN requires a minimum 2-1/4" toe kick height.
2. Once the VACPAN location is determined, cut a 6-3/4" long x 1-3/4" high slot in
the cabinet toe kick to accept the VACPAN .
3. Run vacuum tube piping and low voltage wire from the main piping line to the
VACPAN location.
4. Access for final piping connections must be made. From below, cut an access hole
underneath the cabinet, positioned so that final piping connections can be made
through the access hole. Allow for 1/2" vertical play in vacuum tube piping at Vac-
Pan location so that final piping connections can be made.
5. Attach low voltage wires to the VACPAN terminal connections marked "low voltage
only".
6. Prior to final installation, check for an airtight seal between the VACPAN and elbow.
Teflon tape may be used if required.
7. Slide VACPAN into mounting slot and secure to toe kick using the two #6 screws
provided.
8. Reach through the access hole and make final piping connections.
VACPAN
VACPAN
6
™
™