Dirt Devil DC-RB20 Manuel d'utilisation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Dirt Devil DC-RB20. Dirt Devil DC-RB20 6 pages. Bagless cylinder vacuum cleaner

Imprimer la page

3 Service and maintenance

3.1.

Empty dust bin and clean filter elements

NOTE:

The dust bin has to be emptied and cleaned regularly. Otherwise

emptying it will get harder and harder or smells and bacteria might

develop, depending on what you have vacuumed up.

Therefore, it is best to empty the dust bin after each vacuuming

session.

Empty and clean the dust bin at least.

- every 3 months,

- before prolonged storage or

- before shipping the appliance.

CAUTION:

Switch off the appliance before removing the dust bin. This will prevent

dust from damaging the appliance.

1. Switch off the appliance ( ).

2. Pull the plug out of the plug socket.

3. Remove the dust bin (Fig. 16).

4. Empty the dust bin (Fig. 17).

NOTE:

You can dispose of the content of the dust bin with your domestic waste

as long as the dirt does not contain any substances prohibited for

domestic waste.

5. Take this opportunity to also check the filter elements (dual motor

protection filter and filter unit) in the dust bin (Fig. 18 – 22).

6. If the filter elements (dual motor protection filter and filter unit) are

dirty, clean them under cold or lukewarm running water until all dirt

has gone (Fig. 23).

DD 2210_Rebel 21_Eng_forquotation_091115.indd 4

24 h

CAUTION:

The filter elements are washable, but may not be cleaned in dishwashers

or washing machines.

Do not use cleaning agents or brushes with hard bristles to clean the

filter elements.

Let the filter elements dry (for approx. 24 hours at room temperature,

Fig. 24) after wet cleaning.

Do not re-install them until they are completely dry.

7. Let the filter elements dry (for approx. 24 hours at room temperature,

Fig. 24) after wet cleaning.

8. Insert the filter elements again (Fig. 25 – 28).

NOTE:

The filter elements are designed so that they can only be fully inserted if

in the right position.

Nevertheless, it is helpful if you align the filter unit properly with the

dust bin as shown in Fig. 26 before inserting it.

Then lower the filter unit completely into the dust bin until the three

noses of the dust bin engage with the respective recesses of the filter

unit (Fig. 26).

Do not use force upon insertion. If the dust bin lid (Fig. 28) will not

shut properly, you have to take the parts out again and put them back in.

CAUTION:

Never operate the appliance without the filters in place.

Never operate the appliance with damaged filters.

9. Re-insert the dust bin (Fig. 29).

You must be able to feel and hear it click into place.

click!

13/11/2015 11:33 AM