Dirt Devil M082600 Manuel du propriétaire - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Dirt Devil M082600. Dirt Devil M082600 15 pages. Operating and servicing instructions
Également pour Dirt Devil M082600 : Manuel du propriétaire (8 pages)
HOSE AND TOOL USAGE
CAUTION: If unit is lifted from floor to use hose, loose items may become entangled in the rotating brushroll.
TO USE HOSE AND ATTACHMENTS
1.
2.
Remove the hose from hose
Choose any of the handy accessories
caddy.
or use the hose alone.
TROUBLESHOOTING GUIDE
WARNING: TO REDUCE RISK OF PERSONAL INJURY - UNPLUG CLEANER BEFORE SERVICING
PROBLEM
POSSIBLE REASON
1. Power cord not firmly plugged into
Cleaner won't run
outlet.
2. Blown fuse or tripped breaker.
3. Needs service.
4. Thermal Protector activated.
Cleaner won't
1. Dirt container not installed correctly.
pick-up or low
2. Dirt container full.
suction
3. Brushroll worn.
4. Broken or worn belt.
5. Clogged filter.
6. Nozzle/brushroll clogged.
7. Hose clogged.
Dust escaping
1. Dirt container full.
from cleaner
2. Dirt container not installed correctly.
3. Hose not installed correctly.
4. Filter not installed completely.
ANY OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE
CUSTOMER SERVICE (1-800-321-1134)
In the event that further assistance is required, see your Yellow Pages for an authorized Royal
from any place of repair are to be paid by the owner. The service parts used in this unit are easily replaced and readily available from
an authorized Royal
®
Dealer or retailer. Always identify your cleaner by the model number and manufacturing code when requesting
information or ordering replacement parts. (The model number appears on the bottom of the cleaner.)
3.
Simply push the attachment
firmly onto the hose end. To
remove tool, twist and pull
apart gently.
POSSIBLE SOLUTION
1. Plug unit in firmly.
2. Check fuse or breaker in home. Replace
fuse/reset breaker.
3. Take to service center or call 1-800-321-1134.
4. Unplug cleaner - allow to cool.
1. Review dirt container removal & replacement -
Pg. 7.
2. Empty dirt container - Pg. 7.
3. Replace brushroll - Pg. 8.
4. Replace belt - Pg. 8.
5. Remove filter and clean - Pg. 7.
6. Check nozzle/brushroll; remove obstruction/clog -
Pg. 8.
7. Remove hose; remove clog - Pg. 9.
1. Empty dirt container - Pg. 7.
2. Review dirt container removal & replacement -
Pg. 7.
3. Review hose installation - Pg. 9.
4. Review filter removal & replacement - Pg. 7.
®
Dealer. Costs of any transportation to and
9