Dirt Devil UP04 Manuel de l'utilisateur - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dirt Devil UP04. Dirt Devil UP04 20 pages. Lightweight pet upright
Imprimer la page
MAINTAINING YOUR VACUUM
CLEANER
Cleaning the filters
Cleaning the filters
Before starting any cleaning, ensure the upright vac is not plugged into
CLEANING THE FILTERS
Before starting any cleaning, ensure the upright vac is not plugged into
Wash with water every month , allow at least 24 hours to dry and
Before starting any cleaning, ensure the upright vacuum is not plugged into the mains supply and is switched
make sure it is dry thoroughly before re-using
Wash with water every month , allow at least 24 hours to dry and
off.
make sure it is dry thoroughly before re-using
Wash the filter with water every month. Allow at least 24 hours to dry and make sure it is thoroughly dry
before re-inserting it into the appliance.
1. Remove the
dust canister.
1. Remove the
1.Remove the dust bin.
dust canister.
5.
5. Use cold running
water (no detergents) to
5.
wash both parts of the
filter.
12
DIRTDEVIL.CO.UK
2. Push the
release button,
open the dust
2. Push the
2.Push the release
release button,
canister and
button, open the dust
open the dust
clean all parts of
bin and clean all parts of
the dust canister.
canister and
the dust bin.
clean all parts of
the dust canister.
6. Allow filter to
6.Allow filter to dry for
dry for 24 hours
24 hours before putting
before putting
6. Allow filter to
back into the vacuum
back into
dry for 24 hours
cleaner.
before putting
vacuum cleaner.
back into
vacuum cleaner.
3. Open the dust
canister filter lid
located on top
3. Open the dust
3.Open the dust bin
canister filter lid
of the canister.
filter lid located on top
located on top
of the bin.
of the canister.
7.
7. Lift out the assembly for the transparent dust bin,
and then untwist the filter from the central tube to
7.
remove for cleaning dirt and debris as needed. Follow
steps in reverse to reassemble.
4. Remove the
dust canister foam
and HEPA filter.
4. Remove the
4.Remove the dust bin
dust canister foam
Shake and tap the
foam and HEPA pre-
and HEPA filter.
foam and HEPA
filter. Shake and tap the
filter over a bin to
Shake and tap the
foam and HEPA pre-filter
foam and HEPA
remove any exces s
over a bin to remove any
dust.
filter over a bin to
excess dust.
remove any exces s
dust.