Dirty Hand Tools 101571 Manuel d'utilisation - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Dirty Hand Tools 101571. Dirty Hand Tools 101571 20 pages. 15” front tine tiller

Imprimer la page

Operating Instructions

PRACTICE OPERATING THE CONTROLS AND USING

THE TILLER WITH TINES OUT OF GROUND BEFORE

BEGINNING TO TILL.

It is important that you know how to use the tiller properly,

keep control at all times, stop the tines and wheels from turning,

and stop the engine if necessary.

Read the entire Operation Manual before using the equipment!

Tilling

1. Start the engine.

2. Move the throttle control to fast.

3. Place the tiller in forward by pulling up on the drive lever - this

will engage the tines.

Note: You can slow the tiller's forward advance at any time by

putting slight downward pressure on the handlebars. Stop the tiller

by releasing the drive lever and then stopping the engine.

Drive Lever

Pulling the drive lever toward the handlebar engages the tines.

Releasing the lever stops the tines (see Figure 12).

Tilling Tips

e key to successful tilling is to begin with a shallow cut on the rst

pass, and then work an inch or two deeper on each successive pass.

• Tilling depth will vary with ground conditions.

• When beginning to till in unbroken ground or in extremely hard

soil perform shallow tilling rst then do a second pass going deeper

into the soil.

• Hold on rmly to the handlebars to control sudden lurches.

Immediately release the drive control lever if the tines jam or you

strike a foreign object. With the drive lever in released, push the

throttle control to stop position to stop the engine. Disengage the

spark plug wire. When tines have stopped, remove foreign objects

and check for damage.

WARNING

Pulling the safety

drive lever towards the

handlebar engages the

tines.

Figure 12