Dirty Pro Tools QT6268 Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Dirty Pro Tools QT6268. Dirty Pro Tools QT6268 10 pages. Electric

Operation

Always trail the power cable behind the tool.

If the power cable or extension cable is damaged, pull the plug out of the socket. NEVER TOUCH THE

CABLE BEFORE THE PLUG HAS BEEN PULLED OUT OF THE SOCKET.

Do not carry the tool by its power cable.

Always pull out the power plug:

When the tool is not being used, when it is being transported or when you leave it unsupervised.

When you are checking the tool, cleaning it or removing blockages.

When you want to carry out cleaning or maintenance work on the tool or replace accessories.

After the tool impacts with foreign bodies or you notice unusual vibrations.

Use the tool only in broad daylight or in well-lit conditions.

Do not underestimate the forces involved. Make sure you stand squarely and keep your balance at

all times.

If possible, avoid using the tool on wet grass.

Ensure that you maintain a steady foothold particularly while working on slopes.

Never run carrying the equipment.

Always keep the ventilation opening clean.

Never direct the vacuum/blow hole at people or animals.

The machine may only be used at reasonable times of the day, i.e. not in the early morning or late

evening when it will be a nuisance to other people. Permitted times of use specified by local

authorities must be observed.

The machine must be run at the lowest possible motor speed required to carry out the work.

Remove all foreign objects with a rake and brush before starting any blowing or vacuuming work.

Where conditions are dusty, dampen the surface a little or use a sprinkler attachment.

Use the full-length blower nozzle extension so that the air current can work near to the ground.

Watch out for children, pets, open windows etc. and blow the foreign objects safely away from

them.

Maintenance and storage