3Com NBX 100 Instructions pour la mise à jour du logiciel - Page 2

Parcourez en ligne ou téléchargez le pdf Instructions pour la mise à jour du logiciel pour {nom_de_la_catégorie} 3Com NBX 100. 3Com NBX 100 4 pages. Business telephone
Également pour 3Com NBX 100 : Note de mise à jour (8 pages), Note de mise à jour (11 pages), Manuel de référence rapide (2 pages), Manuel de référence rapide (2 pages), Manuel de référence rapide (2 pages)

NBX System Software Upgrade Instructions

•

A license key is required only for upgrading to major releases, RX.X. All minor releases, RX.X.X,

use the corresponding major release license key.

•

To upgrade an NBX 100 or V5000 system to release R5.0 you must first upgrade to release R4.3.

•

To upgrade an NBX V3000 system to release R5.0, you must be running R4.4 or higher.

THIRD: REMOVE ANY OTHER APPLICATIONS SOFTWARE

Remove any software that you do not want to be carried forward to the new release (for example,

your existing CDR Call Reports).

FOURTH: UPGRADE THE SYSTEM SOFTWARE

You can load the new system software at any time. The system does not begin running the new

software until you select the new system software for a reboot operation. You should plan to reboot to

the new software at a time outside of normal business hours. During the reboot operation, new calls

cannot be initiated and external calls will be terminated.

Installing the System Software License - R4.3 Versions

If you are running R4.3 or a later release of R4.3, you can enter the R5.0license key and then

upgrade to R5.0. When you enter the R5.0 license key, the NBX system accepts the license key as

valid for an unknown feature. When you upgrade and reboot to the new software, the license takes

effect. To enter a system software license:

1. Log on to the NBX NetSet utility as administrator.

2. Select Operations > Licenses > Add License.

Installing the System Software License - R4.2.7 and Prior Releases

If your NBX system software is R4.2.7 or a previous release, you cannot enter the license key for

R5.0 before you upgrade because the NBX system software will not recognize the R5.0 license as

valid. Use these steps to upgrade to R4.3 and then R5.0:

1. Upgrade to R4.3. See "Upgrading the System Software" on the next page for details.

2. Reboot to R4.3. See "Rebooting the System" on the next page for details.

3. When you see the warning message that indicates you must install a license, click the License

button and enter the R5.0license.

Restricted Operation When Running R4.3 or R5.0 Without a Valid License

If you reboot the NBX system to R4.3 or R5.0 without installing the required system software license,

the NBX system remains operational with these restrictions:

•

The NBX NetSet utility is not available. If you log on using the administrator ID and password, a

screen appears giving you two options:

o You can click the Reboot button to go to a reboot screen and reboot to a previous NBX

software release.

o You can click the License button to go to a license screen and enter a license key.

•

Each NBX telephone display panel periodically displays a NO LICENSE message.

•

Auto discovery is turned off for all device types.

•

Voice mail messages are not allowed.