DIS RP 6004 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DIS RP 6004. DIS RP 6004 14 pages. Repeater for dcs 6000

Danish Interpretation Systems

Power LED

Those LED light up when Power is available on the

connector next to the LED

System design

There are no settings to be done on the RP 6004

Repeater.

However it is important to observe, that the unit is

only repeating one of the chains on the CU 6010

Central Unit.

And as so, the specification, which applies to each

of the chain outputs on the CU 6010 Central Units

does also apply to all the repeated outputs in total.

So when designing a system to incorporate RP 6004

Repeaters, bare in mind, that as the RP 6004

'Repeated chain' connector

When connecting the RP 6004 Repeaters to the CU

6010 the first RP 6004 is connected to the 'Loop

through' connector. The next RP 6004 Repeaters

can be connected to either the other 'Loop through'

connector or to one of the 'Repeated out'

connectors. If using the 'Repeated' outputs

Incoming data LED

Those LED flashes, when the unit receives

incoming data from connected units on the

connector next to the LED.

Repeater is repeating only one of the four outputs A

(A1 or A2) or B (B1 or B2) the max. number of

languages configured on the four outputs (1, 2, 3

and 4) is totally max. 16.

If more languages are required, Interpreter sets for

those languages have to be connected either to an

other RP 6004 Repeater, which is connected to the

other of the two chains (A or B) on the CU 6010, or

directly to the other of the two chains (A or B) on a

CU 6010.

maximum two more RP 6004 Repeaters can be

connected extending the maximum cable length in

one chain up to 650 m. The above schematic is

showing the connection using the ''Repeated out'

connectors.

Manual 01 18 04466

User Manual